Tutorial written in PSP 7- 17th October 2003

                                                                No outside Filters or Plugins have been used.

                                                                You can get my Zip file for the selections HERE

                                                                Save into your Paint Shop Pro Selections folder.

                                                           

                                                  1- Open a new transparent image 500x550 pixels.  Add a new layer

                                                      called Front, go to Selections/Load From Disk and load Front.sel

                                                      from the Zip file you downloaded.

                                     Flood Fill with Finished Wood Pattern, Scale=50%, Angle=90

 

                                                  

 

                                           Then go to Effects/3D Effects/Inner Bevel and apply the following:

                                                      Deselect.

                                     2- Add a new layer called Left Door, Selections/Load From Disk -

                                                     Door.sel.  Flood fill with wood pattern, Effects/3D Effects/

                                                     Inner Bevel.

                                                   

                                                    Deselect.

                                            On your Layer Palette right click on this layer, Duplicate and using 

                                                      the mover Tool move into position naming it Right Door.

 

 

                                                 3- Add a new layer called Left Door Panel, Selections/Load From Disk-

                                                      Door Panel.sel.  Flood fill with wood pattern, Effects/3D Effects/

                                                      Inner Bevel, same as last used.  Deselect.

                                            Same layer, Selections/Load From Disk/Door Insert.sel.  Flood  

                                                      fill with White, apply the following Inner Bevel:

 

                                                                                       

                                                                                                         Deselect.

                                                      Same layer, Selections/Load From Disk/Decoration.sel.  Flood fill 

                                                      with White and go to Effects/Texture/Sculpture and use the Gold

                                                      Preset.                                                                                  

                                                                                 

                                                                                                 Deselect.

                                                  6- Add a new layer called Top, Selections/Load From Disk-Top.sel.

                                                      Flood fill with wood pattern, Effects/3D Effects/Inner Bevel.

                                                      Use the same Inner Bevel you used on the Door.  Deselect and                                                           move this layer under your Front layer.

 

                                       7- On your Layer Palette make sure that you have the top layer

                                                      highlighted and add a new layer called Front Corner, 

                                                      Selections/Load From Disk-Front Corner.sel.  Flood fill with

                                            White, Effects/Texture Effects/Sculpture, same settings as previously,

                                            then Effects/Artistic Effects/Enamel and use these settings:

                                                      

                                                                       

                                                                                                    Deselect.

 

                                                  8- Add a new layer called Nails, Selections/Load From Disk-

                                             Front Corner Nails, Flood fill with White, Effects/Texture Effects/

                                                       Sculpture and use the same settings as previously.  Deselect.

 

                                             On the Layer Palette click on the glasses to turn off all layers

                                                        except the Front Corner and Nails layers.  Then go to 

                                                       Layers/Merge/Merge Visible.  Rename Front Corners.  Press Ctrl-C

                                                       to copy the corner then press Ctrl-E to paste it, while still selected

                                                       go to Image/Flip and move into position at the bottom of the door.

                                                       Deselect.  Rename as Left Front Corners.

 

                                                       Duplicate this layer, go to Image/Mirror and after turning all layers 

                                                      back on move into position.  Rename as Right Front Corners.

 

 

                                                  9- Add a new layer called Door Corner, Selections/Load From Disk-

                                                       Door Corner.sel,  Flood fill with White, Effects/Texture Effects/

                                                       Sculpture, same settings as previously. Effects/Artistic Effects/

                                             Enamel and use the same settings as previously.  Deselect.

 

                                                 10-Add a new layer called Nails, Selections/Load From Disk-

                                                      Door Nails.sel, Flood fill with White, Effects/Texture Effects/

                                            Sculpture and use  the same settings as previously.  Deselect.

 

                                           On the Layer Palette click on the glasses to turn off all layers

                                                      except the Door Corner and Nails layers.  Then go to Layers/Merge/

                                                     Merge Visible.  Press Ctrl-C to copy the corner then press Ctrl-E to 

                                                     paste it, while still selected go to Image/Flip and move into position at

                                                     the bottom of the door after turning layers back on. Rename as Left

                                                     Door Corners

 

                                                       Duplicate this layer, go to Image/Mirror and move into position.

                                            Rename as Right Door Corners.

                                                      

                                                 11-Add a new layer called Foot, Selections/Load From Disk-

                                             Foot.sel, Flood fill with Wood Pattern, Effects/3D Effects/

                                                       Inner Bevel, using the same settings as before.  Deselect.

 

                                                       On the same layer, Selections/Load From Disk-Foot Deco.sel.

                                             Flood fill with White, Effects/Texture Effects/Sculpture and use

                                                       the same settings as previously, then go to Effects/Artistic Effects/

                                             Enamel and use the same settings as previously.  Deselect.

 

                                                 12-Add a new layer called Nails, Selections/Load From Disk-

                                                       Foot Nail.sel.  Flood fill with White, Effects/Texture Effects/Sculpture

                                             and use  the same settings as previously.  Deselect.

 

                                             Turn off all layers except the Foot and Nails layers and then go to

                                             Layers/Merge/Merge Visible, rename as Feet.  Turn all layers on.

                                             Move this layer under the Front Layer (you will have to move the foot 

                                             in under the front of the box just a little), press Ctrl-C to copy then

                                             Ctrl-E to paste, while selected go to Image/Mirror and move

                                              into position.  Deselect.

                                             

 

                                       13-Highlight the top layer in the Layer Palette and add a new layer called

                                             Door Strip, Selections/Load From Disk-Door Strip.sel, Flood fill

                                                       with White, Effects/Texture Effects/Sculpture, same settings,

                                             Effects/Artistic Effects/Enamel, same settings.  Deselect.

 

 

                                                 14-Add a new layer called Nails, Selections/Load From Disk-Door Strip

                                                       Nails.sel, Flood fill with White, Effects/Texture Effects/Sculpture

                                             and use same settings.  Deselect.

 

                                                      Same layer, Selections/Load From Disk-Leaf.sel, Flood fill with 

                                            White, Effects/Texture Effects/Sculpture and use same settings. 

                                            Deselect.

 

                                                      Same layer, Selections/Load From Disk-Leaf Clasp.sel, Flood fill

                                            with White, Effects/Texture Effects/Sculpture and use same settings.

                                                      Deselect.

 

                                                      Turn off all layers except the Door Strip and Nails layers and 

                                                      Merge/Merge Visible, rename as Left Door Strip.

 

                                                      Duplicate the Door Strip layer, Image/Mirror, turn all layers back on 

                                            and move into position, rename as Right Door Strip.

 

                                                  15-Add a new layer called Handle, Selections/Load From Disk-

                                                        Handle Bottom.sel, Flood fill with White, Effects/Texture Effects/

                                              Sculpture and use the same settings.  Deselect.

 

                                                       Same layer, Selections/Load From Disk-Handle.sel, Flood fill with

                                              White, Effects/Texture Effects/Sculpture and use the same settings.

                                                        Deselect.

 

                                                  16-Add a new layer called Top Corners, Selections/Load From Disk-

                                              Top Corner.sel, Flood fill with White, Effects/Texture Effects/

                                                        Sculpture same settings, then Effects/Artistic Effects/Enamel, same

                                              settings.  Deselect.  Press Ctrl-C then Ctrl-E, go to Image/Mirror

                                                        and move into position.

 

                                                        Hooray all finished!  Hope that you like the finished product.  You can

                                                        now Merge your layers and Tube it or save it as a PSP image,

                                              whatever you like.  With the box below I merged all the right hand

                                                        door layers first and used the Deformation Tool to make it look like

                                                        the door was open.  I then added some panels for the drawers and

                                                        gold handles.